Zabbix SNMPv2 UBNT-UniFi-MIB monitoring

Monitors Ubiquiti device parameters, such as Ethernet, Radio and virtual access point interfaces, exposed by the UBNT-UniFi-MIB and UBNT-MIB via SNMPv2.

This template is part of RaBe's Zabbix template and helpers collection.

Usage

Download the UBNT-UniFi-MIB and UBNT-MIB.
Place the MIB file(s) into your default MIB directory on the Zabbix server and/or proxy (usually /usr/local/share/snmp/mibs) and make sure that the Zabbix server and/or proxy loads them (see Using and loading MIBs).
Import the Template_SNMPv2_UBNT-UniFi-MIB.xml into your Zabbix server (click on the Raw button to download).
Add an SNMP interface configuration to your host
Set the {$SNMP_COMMUNITY} macro to your desired community if you don't use public
Add the template to your host (or stack template)
Check if new data arrives

Notes

snmpwalk command

The following snmpwalk command might be helpful for debugging:

snmpwalk -v 2c -c public <HOST> UBNT-MIB::ubnt

Template SNMPv2 UBNT-UniFi-MIB

SNMPv2 template for monitoring Ubiquiti devices exposing UBNT-UniFi-MIB (The UniFi MIB module for Ubiquiti Networks, Inc.) entities.

Items

IP address of access point (rabe.snmp.ubnt-unifi-mib.unifiApSystemIp[])
The IP address of the access point.
Model of access point (rabe.snmp.ubnt-unifi-mib.unifiApSystemModel[])
The model of the access point.
Uptime of access point (rabe.snmp.ubnt-unifi-mib.unifiApSystemUptime[])
The uptime of the access point.
Version of access point (rabe.snmp.ubnt-unifi-mib.unifiApSystemVersion[])
The firmware version of the access point.

Macros

{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_PERCENTAGE} (default: 90)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_TIME} (default: 30m)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_PERCENTAGE} (default: 80)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_TIME} (default: 15m)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_PERCENTAGE} (default: 90)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_TIME} (default: 30m)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_PERCENTAGE} (default: 80)
{$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_TIME} (default: 15m)
{$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_PERCENTAGE} (default: 95)
{$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_TIME} (default: 30m)
{$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_PERCENTAGE} (default: 85)
{$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_TIME} (default: 30m)
{$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_HIGH_THRESHOLD} (default: 70)
{$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_WARNING_THRESHOLD} (default: 50)

Discovery

Ethernet interfaces (`rabe.snmp.ubnt-unifi-mib.unifiIfEntry.discovery`)

Discovery of Ethernet interfaces

Returns the following macro for each available Ethernet interface (UbntIfEntry) * {#IF_NAME} * The name of each discovered Ethernet interface (UBNT-UniFi-MIB::unifiIfName).

Item Prototypes

IP address of Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfIp[{#IF_NAME}])
The IP address of the Ethernet interface.
MAC address of Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfMac[{#IF_NAME}])
The MAC address of the Ethernet interface.
Inbound traffic on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfRxBytes[{#IF_NAME}])
Received bits per second on the Ethernet interface.
Inbound packets dropped on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfRxDropped[{#IF_NAME}])
Inbound dropped packets per second on the Ethernet interface.
Inbound errors on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfRxError[{#IF_NAME}])
Inbound errors per second on the Ethernet interface.
Inbound packets on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfRxPackets[{#IF_NAME}])
Inbound packets per second on the Ethernet interface.
Speed of Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfSpeed[{#IF_NAME}])
Speed of the Ethernet interface.
Outbound traffic on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfTxBytes[{#IF_NAME}])
Transmitted bits per second on the Ethernet interface.
Outbound packets dropped on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfTxDropped[{#IF_NAME}])
Outbound dropped packets per second on the Ethernet interface.
Outbound errors on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfTxError[{#IF_NAME}])
Outbound errors per second on the Ethernet interface.
Outbound packets on Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfTxPackets[{#IF_NAME}])
Outbound packets per second on the Ethernet interface.
Up status of Ethernet interface $1 (rabe.snmp.ubnt-unifi-mib.unifiIfUp[{#IF_NAME}])
The up status of the Ethernet interface.

Trigger Prototypes

Warning: Inbound utilization is high (> $2 % over {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_TIME:"{#IF_NAME}"}) on {HOST.NAME} interface {#IF_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfRxBytes[{#IF_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_TIME:"{#IF_NAME}"})} > {Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfSpeed[{#IF_NAME}].last()} / 100 * {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_PERCENTAGE:"{#IF_NAME}"}
```
The inbound average interface utilization is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_PERCENTAGE:"{#IF_NAME}"}) of the maximum interface speed over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_WARNING_TIME:"{#IF_NAME}"}).
High: Inbound utilization is very high (> $2 % over {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_TIME:"{#IF_NAME}"}) on {HOST.NAME} interface {#IF_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfRxBytes[{#IF_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_TIME:"{#IF_NAME}"})} > {Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfSpeed[{#IF_NAME}].last()} / 100 * {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_PERCENTAGE:"{#IF_NAME}"}
```
The inbound average interface utilization is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_PERCENTAGE:"{#IF_NAME}"}) of the maximum interface speed over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_IN_UTILIZATION_HIGH_TIME:"{#IF_NAME}"}).
High: Interface status is down on {HOST.NAME} interface {#IF_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfUp[{#IF_NAME}].last()}<>1
```
The Ethernet interface is down.
Warning: Outbound utilization is high (> $2 % over {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_TIME:"{#IF_NAME}"}) on {HOST.NAME} interface {#IF_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfTxBytes[{#IF_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_TIME:"{#IF_NAME}"})} > {Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfSpeed[{#IF_NAME}].last()} / 100 * {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_PERCENTAGE:"{#IF_NAME}"}
```
The outbound average interface utilization is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_PERCENTAGE:"{#IF_NAME}"}) of the maximum interface speed over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_WARNING_TIME:"{#IF_NAME}"}).
High: Outbound utilization is very high (> $2 % over {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_TIME:"{#IF_NAME}"}) on {HOST.NAME} interface {#IF_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfTxBytes[{#IF_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_TIME:"{#IF_NAME}"})} > {Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiIfSpeed[{#IF_NAME}].last()} / 100 * {$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_PERCENTAGE:"{#IF_NAME}"}
```
The outbound average interface utilization is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_PERCENTAGE:"{#IF_NAME}"}) of the maximum interface speed over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_ETH_IF_OUT_UTILIZATION_HIGH_TIME:"{#IF_NAME}"}).

Radio interfaces (`rabe.snmp.ubnt-unifi-mib.unifiRadioEntry.discovery`)

Discovery of radio interfaces.

Returns the following macro for each available radio interface (unifiRadioEntry) * {#RADIO_NAME} * The name of each discovered radio interface (UBNT-UniFi-MIB::unifiRadioName).

Item Prototypes

Channel utilization self receive on radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioCuSelfRx[{#RADIO_NAME}])
The self receive channel utilization on the radio interface in percent.
Channel utilization self transmit on radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioCuSelfTx[{#RADIO_NAME}])
The self transmit channel utilization on the radio interface in percent.
Channel utilization total on radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioCuTotal[{#RADIO_NAME}])
The total channel utilization on the radio interface in percent.
Mode of radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioRadio[{#RADIO_NAME}])
The radio interface's mode.
Received packets on radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioRxPackets[{#RADIO_NAME}])
The number of received packets on the radio interface per second.
Transmitted packets on radio interface $1 (rabe.snmp.ubnt-unifi-mib.unifiRadioTxPackets[{#RADIO_NAME}])
The number of transmitted packets on the radio interface per second.

Trigger Prototypes

Warning: Total channel utilization is high (> $1% over {$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_TIME:"{#RADIO_NAME}"}) on {HOST.NAME} radio interface {#RADIO_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiRadioCuTotal[{#RADIO_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_TIME:"{#RADIO_NAME}"})} > {$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_PERCENTAGE:"{#RADIO_NAME}"}
```
The total average channel utilization of the radio interface is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_PERCENTAGE:"{#RADIO_NAME}"}) over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_WARNING_TIME:"{#RADIO_NAME}"}).
High: Total channel utilization is very high ( > $1% over {$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_TIME:"{#RADIO_NAME}"}) on {HOST.NAME} radio interface {#RADIO_NAME}
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiRadioCuTotal[{#RADIO_NAME}].avg({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_TIME:"{#RADIO_NAME}"})} > {$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_PERCENTAGE:"{#RADIO_NAME}"}
```
The total average channel utilization of the radio interface is higher than the configured percent value ({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_PERCENTAGE:"{#RADIO_NAME}"}) over the configured amount of time ({$SNMPV2_UBNT_UNIFI_MIB_RADIO_IF_TOTAL_UTILIZATION_HIGH_TIME:"{#RADIO_NAME}"}).

Virtual access point interfaces (`rabe.snmp.ubnt-unifi-mib.unifiVapEntry.discovery`)

Discovery of virtual access point interfaces

Returns the following macros for each available virtual access point interface (unifiVapEntry) * {#VAP_NAME} * The name of each discovered virtual access point interface (UBNT-UniFi-MIB::unifiVapName). * {#VAP_ESSID} * The (current) Extended Service Set (ESS) ID of each discovered virtual access point interface (UBNT-UniFi-MIB::unifiVapEssId).

Item Prototypes

BSS ID of virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapBssId[{#VAP_NAME}])
The Basic Service Set (BSS) ID of the virtual access point.
Channel of virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapChannel[{#VAP_NAME}])
The channel of the virtual access point.
ESS ID of virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapEssId[{#VAP_NAME}])
The Extended Service Set (ESS) ID of the virtual access point.
Number of connected stations on access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapNumStations[{#VAP_NAME}])
The number of connected stations on this virtual access point.
Inbound traffic on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapRxBytes[{#VAP_NAME}])
Received bits per second on the virtual access point.
Inbound packets dropped on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapRxDropped[{#VAP_NAME}])
Inbound dropped packets per second on the virtual access point.
Inbound errors on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapRxErrors[{#VAP_NAME}])
Inbound errors per second on the virtual access point.
Inbound packets on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapRxPackets[{#VAP_NAME}])
Inbound packets per second on the virtual access point.
Inbound retries on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapRxRetries[{#VAP_NAME}])
Inbound retries per second on the virtual access point.
Outbound traffic on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapTxBytes[{#VAP_NAME}])
Transmitted bits per second on the virtual access point.
Outbound packets dropped on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapTxDropped[{#VAP_NAME}])
Outbound dropped packets per second on the virtual access point.
Outbound errors on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapTxErrors[{#VAP_NAME}])
Outbound errors per second on the virtual access point.
Outbound packets on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapTxPackets[{#VAP_NAME}])
Outbound packets per second on the virtual access point.
Outbound retries on virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapTxRetries[{#VAP_NAME}])
Outbound retries per second on the virtual access point.
Up status of virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapUp[{#VAP_NAME}])
The up status of the virtual access point.
Usage type of virtual access point $1 (rabe.snmp.ubnt-unifi-mib.unifiVapUsage[{#VAP_NAME}])
The usage type of the virtual access point.

Trigger Prototypes

Warning: Many stations (> $1) connected to virtual access point on {HOST.NAME} interface {#VAP_NAME} ({#VAP_ESSID})
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiVapNumStations[{#VAP_NAME}].last()} >= {$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_WARNING_THRESHOLD:"{#VAP_NAME}"}
```
There are many stations (> {$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_WARNING_THRESHOLD:"{#VAP_NAME}"}) connected to the virtual access point.
High: Too many stations (> $1) connected to virtual access point on {HOST.NAME} interface {#VAP_NAME} ({#VAP_ESSID})
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiVapNumStations[{#VAP_NAME}].last()} >= {$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_HIGH_THRESHOLD:"{#VAP_NAME}"}
```
There are too many stations (> {$SNMPV2_UBNT_UNIFI_MIB_VAP_IF_CONNECTED_STATIONS_HIGH_THRESHOLD:"{#VAP_NAME}"}) connected to the virtual access point.
Information: Virtual access point ESS ID name was changed on {HOST.NAME} interface {#VAP_NAME} ({#VAP_ESSID})
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiVapEssId[{#VAP_NAME}].diff()}=1
```
The ESS ID of the virtual access point was changed.
High: Virtual access point status is down on {HOST.NAME} interface {#VAP_NAME} ({#VAP_ESSID})
```
{Template SNMPv2 UBNT-UniFi-MIB:rabe.snmp.ubnt-unifi-mib.unifiVapUp[{#VAP_NAME}].last()}<>1
```
The virtual access point interface is down.

License

This template is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, version 3 of the License.

Zabbix SNMPv2 UBNT-UniFi-MIB monitoring

Usage

Notes

snmpwalk command

Template SNMPv2 UBNT-UniFi-MIB

Items

Macros

Discovery

Ethernet interfaces (rabe.snmp.ubnt-unifi-mib.unifiIfEntry.discovery)

Item Prototypes

Trigger Prototypes

Radio interfaces (rabe.snmp.ubnt-unifi-mib.unifiRadioEntry.discovery)

Item Prototypes

Trigger Prototypes

Virtual access point interfaces (rabe.snmp.ubnt-unifi-mib.unifiVapEntry.discovery)

Item Prototypes

Trigger Prototypes

License

Copyright

Ethernet interfaces (`rabe.snmp.ubnt-unifi-mib.unifiIfEntry.discovery`)

Radio interfaces (`rabe.snmp.ubnt-unifi-mib.unifiRadioEntry.discovery`)

Virtual access point interfaces (`rabe.snmp.ubnt-unifi-mib.unifiVapEntry.discovery`)