Zabbix Sensor Discovery monitoring

Zabbix low-level discovery of IPMI sensors, including their types, units and thresholds.

This is not an actual Zabbix template, but rather an external check script for low-level discovery of IPMI sensors (as Zabbix currently lacks LLD for IPMI sensors). The script is required by most of the IPMI templates.

Usage

Install the ipmi-sensors command from the FreeIPMI project, which can usually be found within the freeipmi package of your distribution.
Copy the ipmi-sensor-discovery.sh script into your Zabbix servers/proxy external script directory (ExternalScripts).
Make sure the script is executable by the user running the zabbix-server

If you have SELinux active, ensure that the Zabbix server is allowed to execute the script and is allowed to operate on directories and files within its home directory (this is required for accessing the cache directory of the ipmi-sensor command, located at `~/.freeipmi/). On CentOS 7 the following steps were necessary:

# Create the missing home directory of the zabbix user
mkdir -m 750 /var/lib/zabbix
chown zabbix:zabbix /var/lib/zabbix

# Restore default SELinux security context on the directory.
# This will set the following SELinux context on /var/lib/zabbix
# => unconfined_u:object_r:zabbix_var_lib_t:s0
restorecon -Rv /var/lib/zabbix

Reference the script within Zabbix by either
creating a new custom LLD rule (external check), item and trigger prototypes
importing an existing IPMI template and add it to your host (or stack template)
Set the following user macros on your host or template (those are required for the auto discovery to work)
{$HOST.IPMI.CONN} IP address or domain name of your IPMI host
{$HOST.IPMI.USER} IPMI user
{$HOST.IPMI.PASS} IPMI password
Add an IPMI interface to your host
Configure the IPMI parameters of your host
Check if new data arrives

Low-level discovery rule example:

Navigate to Configure / Templates / <YOUR TEMPLATE>
Under Discovery rule create a similar rule as below


Name	`Fan and Temperature IPMI sensor discovery`
Type	`External check [v]`
Key	`ipmi-sensor-discovery.sh["{$HOST.IPMI.CONN}","{$HOST.IPMI.USER}","{$HOST.IPMI.PASS}", "Temperature,Fan"]`

Notes

Commands for debugging

The following commands might be helpful for debugging:

# read all sensors using the ipmi-sensors command
ipmi-sensors -D LAN -h <IPMI-HOST> -u <IPMI-USER> -p <IPMI-PASSWORD> -l USER 

# Get the Zabbix LLD JSON output for the sensors
ipmi-sensor-discovery.sh <IPMI-HOST> <IPMI-USER> <IPMI-PASSWORD>

# Manually remove the FreeIPMI SDR cache
rm -rf ~zabbix/.freeipmi-zabbix/

This template is part of RaBe's Zabbix template and helpers collection.

Template IPMI Sensor Discovery

This is just an empty IPMI Sensor discovery dummy template, required for documentation generation. There's no need to install it.

Scripts

ipmi-sensor-discovery.sh Zabbix IPMI sensor low-level discovery

This script is intended to be used for Zabbix low-level discovery of IPMI sensors, as Zabbix currently lacks LLD for IPMI items.

It uses the FreeIPMI ipmi-sensors command to produce a list of available sensors and transforms the output into the Zabbix LLD JSON format. One is supposed to run this script as an external check script on a Zabbix server or proxy within a LLD rule. The script lists all available sensors of a given IPMI host by default.

Optionally, the sensor list can be limited to one or multiple (comma separated) senor types (see ipmi-sensors --list-sensor-types).

Requirements: * ipmi-sensors command (usually within the freeipmi package of your distribution) * GNU awk (should already be installed on your system)

Usage: ipmi-sensor-discovery.sh IPMI-HOST IPMI-USER IPMI-PASSWORD [IPMI-SENSOR-TYPES]

LLD macros: * {#IPMI_SENSOR_ID} - ID of the IPMI sensor * {#IPMI_SENSOR_NAME} - Name of the IPMI sensor * {#IPMI_SENSOR_TYPE} - Type of the IPMI sensor * {#IPMI_SENSOR_READING} - Current sensor value (if appropriate) * {#IPMI_SENSOR_UNITS} - Sensor units * {#IPMI_SENSOR_LOWER_NR} - Sensor lower non-recoverable threshold * {#IPMI_SENSOR_LOWER_C} - Sensor lower critical threshold * {#IPMI_SENSOR_LOWER_NC} - Sensor lower non-critical threshold * {#IPMI_SENSOR_UPPER_NC} - Sensor upper non-critical threshold * {#IPMI_SENSOR_UPPER_C}- Sensor upper critical threshold * {#IPMI_SENSOR_UPPER_NR}- Sensor upper non-critical threshold * {#IPMI_SENSOR_EVENT}- Sensor event

Example output:

href="#__codelineno-2-1"> { "data" : [ { "{#IPMI_SENSOR_ID}" : "205", "{#IPMI_SENSOR_NAME}" : "System Temp", "{#IPMI_SENSOR_TYPE}" : "Temperature", "{#IPMI_SENSOR_READING}" : "26.00", "{#IPMI_SENSOR_UNITS}" : "C", "{#IPMI_SENSOR_LOWER_NR}" : "-9.00", "{#IPMI_SENSOR_LOWER_C}" : "-7.00", "{#IPMI_SENSOR_LOWER_NC}" : "-5.00", "{#IPMI_SENSOR_UPPER_NC}" : "80.00", "{#IPMI_SENSOR_UPPER_C}" : "85.00", "{#IPMI_SENSOR_UPPER_NR}" : "90.00", "{#IPMI_SENSOR_EVENT}" : "OK" }, { "{#IPMI_SENSOR_ID}" : "2483", "{#IPMI_SENSOR_NAME}" : "FAN1", "{#IPMI_SENSOR_TYPE}" : "Fan", "{#IPMI_SENSOR_READING}" : "5600.00", "{#IPMI_SENSOR_UNITS}" : "RPM", "{#IPMI_SENSOR_LOWER_NR}" : "300.00", "{#IPMI_SENSOR_LOWER_C}" : "500.00", "{#IPMI_SENSOR_LOWER_NC}" : "700.00", "{#IPMI_SENSOR_UPPER_NC}" : "25300.00", "{#IPMI_SENSOR_UPPER_C}" : "25400.00", "{#IPMI_SENSOR_UPPER_NR}" : "25500.00", "{#IPMI_SENSOR_EVENT}" : "OK" }, { "{#IPMI_SENSOR_ID}" : "4627", "{#IPMI_SENSOR_NAME}" : "PS1 Status", "{#IPMI_SENSOR_TYPE}" : "Power Supply", "{#IPMI_SENSOR_READING}" : "N/A", "{#IPMI_SENSOR_UNITS}" : "N/A", "{#IPMI_SENSOR_LOWER_NR}" : "N/A", "{#IPMI_SENSOR_LOWER_C}" : "N/A", "{#IPMI_SENSOR_LOWER_NC}" : "N/A", "{#IPMI_SENSOR_UPPER_NC}" : "N/A", "{#IPMI_SENSOR_UPPER_C}" : "N/A", "{#IPMI_SENSOR_UPPER_NR}" : "N/A", "{#IPMI_SENSOR_EVENT}" : "Presence detected" }, ] }

License

This template is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, version 3 of the License.